Mazda CX 5 Won’t Turn Off is a common issue that you and many of our readers have been inquiring about recently.
If you’re experiencing this problem, rest assured, you’re not alone!
The 2017 Mazda CX 5, despite being a popular choice among many, has been reported by numerous customers to have an issue with shutting down.
This has caused quite a bit of frustration for you and others.
But don’t worry!
We’re here to provide you with the help you need to tackle this issue.
Continue reading to learn more about how you can solve this problem with your Mazda CX 5.
Let’s turn this headache into a thing of the past!
We are committed to helping you resolve this issue and ensure a smooth driving experience with your Mazda CX 5.
Stay tuned for more updates and solutions tailored for you!
What Are The Reasons Why Your Mazda CX 5 Won’t Turn Off?
Mazda CX 5 Won’t Turn Off – This is a common issue that many Mazda CX 5 owners, particularly those with the 2014 model, have reported. There are several reasons why your Mazda CX 5 may not be able to shut down. Let’s delve into each one:
-
Ignition Pump Relay
The ignition pump relay could be the culprit if your car won’t start or turn off a couple of times, and you can’t hear the fuel pump when turning into a shifted position on the ignition. The ignition pump relay supplies electricity to the fuel pump, which increases fuel pressure in the rail to activate the engine. If it struggles with dust accumulation, gets affected by a blown fuse, or has electrical power surges, the component can keep functioning without recognizing the signal to shut down.
-
Ignition Module
The ignition module could be another reason why your Mazda CX 5 won’t turn off. This module, also known as the ESC module, controls different engine operations required for a modern car to run. Its main mission is to smooth the process of increasing or decreasing power and optimize efficiency. Therefore, any issues with it might affect your vehicle’s performance, resulting in the engine not being able to turn off.
-
Start/Stop Button
The start/stop button is one of the most obvious parts that could be responsible for this malfunction. If this power button is stuck with debris built up, or if there are some technical problems like scratching, being dented, or a broken power button, your Mazda CX 5 may not start. Therefore, it’s crucial to check these parts carefully to find the right solution.
How Can You Fix a Mazda That Won’t Turn Off?
If your Mazda CX 5 won’t turn off, there are several potential solutions that you can try. Here are three possible approaches that have been tested and proven effective by many Mazda CX 5 owners:
Replace Ignition Module
- First, locate your relay fuse. In many cases, it’s located right under the hood, near the fuel pump. However, some Mazda 2014 CX-5 owners have found it below the dashboard.
- Refer to your 2020 CX-5 owner’s manual provided by the auto manufacturers to ensure you’re following the correct procedures.
- The functions of the fuse box are usually printed on the cover of the panel. Check the fuse box’s cover to confirm its functions.
- Use a pair of extra large pliers to remove the relay fuse. This step requires a strong hand and a solid tool.
- Replace the ignition cylinder module with a new one.
Replace the Fuel Pump Relay
- Locate your fuel pump. It’s usually near the relay fuel, both of which are typically located in the same box.
- Remove the panel cover of the fuse box.
- Open the hood and locate the fuel pump. Then, use a pair of pliers to remove the fuel pump fuse.
- Wait for a certain period of time. It can be 10 seconds or a couple of minutes, at which point the car should stop.
- Replace the ignition module with a new one.
- Install a new fuel pump relay.
- Verify the fuel pump relay’s functionality. If nothing works, you might have to replace the whole fuel pump.
Replace The Start/Stop Button
If your Mazda 6 won’t turn off, the start/stop button could be the cause of the issue.
Given the technical nature of functioning upon electronic parts that are directly attached to your vehicle’s computer, figuring out whether the start/stop button is the cause of the issue can be difficult.
For this repair, it’s recommended to visit a reliable auto shop to seek a qualified technician who specializes in working on Mazda vehicles.
They might need to install a new start/stop button and configure it to work correctly. This is a crucial step in ensuring that your Mazda CX 5 functions properly.
Remember, it’s always best to seek professional help when dealing with complex car issues.
How do you turn off a Mazda CX-5?
Turning off a Mazda CX-5 is a straightforward process:
- First, ensure that the vehicle’s transmission shift lever is in the neutral position and set the parking brake.
- Next, move the selector lever to the P (Park) position.
- Finally, press the start/stop button to shut down the engine.
These steps should effectively turn off your Mazda CX-5.
However, if you’re still experiencing issues with turning off your vehicle, it could be due to a number of reasons such as problems with the ignition module, the fuel pump relay, or the start/stop button itself.
In such cases, it’s recommended to seek professional help from a qualified mechanic or your local Mazda dealership.
Does a Mazda car engine turn off automatically?
Yes, Mazda cars are equipped with a technology called “i-stop” which automatically switches off the engine when the vehicle is at a complete stop.
This technology is designed to save fuel and reduce emissions.
When the engine is at an operating temperature and you come to a complete stop, i-stop will automatically switch off the engine.
The system keeps the engine ready to ignite, so when you lift your foot off the brakes, the engine restarts almost instantly and you’re ready to go.
However, there are certain conditions under which the i-stop system won’t work, such as when the air conditioning is on maximum settings, if you’re on an incline, if you’re in reverse, if the doors are open, or if the driver’s seat belt is unfastened.
If you wish to override the i-stop system at any stage, you can press the i-stop button on the right-hand side of the dash and the engine will operate as per normal.
Please note that the system reactivates each time you turn off the car.
Why wont my Mazda CX-5 turn on?
There could be several reasons why your Mazda CX-5 won’t turn on. Here are some of the most common causes:
1. Drained Battery
If your Mazda CX-5’s engine won’t crank or cranks very slowly, then the most likely culprit is a weak or dead 12v battery. You can measure the voltage between the battery poles to check the condition of the battery. If the battery is indeed drained, you can jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.
2. Corrosion on Battery Terminals
Corrosion on the contacts of your car battery can lead to loss of contact and reduced current flow, which means that your engine can no longer start properly. If you discover white or silvery-green deposits on the battery terminals, you can clean them to restore proper contact.
3. Faulty Spark Plugs
If your Mazda CX-5 has been starting up more slowly than usual, or if it’s taking longer to get up to speed, this could be a problem with your spark plugs.
4. Fuel Pump Failure or Clogged Fuel Pump
If your Mazda CX-5 isn’t starting, it could be due to a problem with the fuel pump. The fuel pump is responsible for delivering fuel from the tank to the engine. If the fuel pump is failing or if it’s clogged, it may not be able to deliver enough fuel to the engine, preventing the car from starting.
How do you turn on the i-stop on a Mazda CX-5?
Turning on the i-stop feature on a Mazda CX-5 is a straightforward process. Here are the steps:
- Start the car.
- Locate the i-stop deactivation button, which is found on the switch panel, mounted on the dash to the right of the steering column.
- Press the i-stop on/off switch once, and hold for 2 seconds. This should make the i-stop dash indicator light illuminate a continual orange.
Please note that the i-stop system reactivates each time you turn off the car.
If you decide at any stage that you want to override the i-stop system, you just simply press the button on the right-hand side of the dash and the engine operates as per normal.
Always refer to your vehicle’s owner’s manual for the most accurate information.
Also Read: Why Is Subaru Brake Light Flashing And Traction Control Light?
FAQs – Mazda CX 5 Won’t Turn Off
How do I reset my Mazda CX-5?
To reset your Mazda CX-5, you need to locate the music, navigation, and location buttons. Press all three buttons at once and hold them down for at least twenty seconds. The Mazda Connect system should start rebooting itself. Be aware that this will also reset the changes you made in the infotainment and audio systems.
How do I get my Mazda CX-5 out of anti-theft mode?
To deactivate the anti-theft system, you can press the unlock button on the transmitter, switch the ignition ON, or press a request switch on the doors. If the system is still activated, you may need to consult an Authorized Mazda Dealer.
How long does Mazda CX-5 battery last?
The average lifespan of a Mazda CX-5 battery is between three and five years. However, the exact lifespan can depend on various factors such as the frequency of short drives, leaving lights on, and not maintaining the electrical system properly.
How do I know if i-stop is working?
The i-stop system is ready when its indicator light illuminates green in the dash. If the i-stop indicator light is orange, then i-stop is deactivated. Remember, i-stop only works when you’ve applied the brake and you’re holding it down.
What if replacing components didn’t help turn off the Mazda CX-5?
If replacing components didn’t help turn off the Mazda CX-5, you may need a professional mechanic to diagnose the problem. It could be a more complex issue that requires professional expertise.
How Do You Manually Turn Off A Mazda?
To manually turn off a Mazda, you simply need to press the start/stop button while the car is in park. If your vehicle is equipped with i-stop, you can also press the i-stop button to deactivate the system.
Do Keyless Cars Automatically Turn Off Mazda 2015 CX-5?
Keyless cars like the Mazda 2015 CX-5 do not automatically turn off. However, they are equipped with a feature called i-stop that automatically turns off the engine when the vehicle is at a complete stop to save fuel and reduce emissions. The engine restarts almost instantly when you lift your foot off the brakes.
Conclusion – Mazda CX 5 Won’t Turn Off
Is your Mazda CX-5 refusing to turn off, despite numerous attempts with the start button?
It can indeed be a frustrating experience.
However, every challenge is an opportunity for learning.
This situation is no different, providing you with a chance to understand your vehicle better.
The information provided above should equip you with the necessary knowledge to tackle this issue.
It’s our hope that this article has been helpful to you.
Until next time, safe driving!
