If you own a Chevy HHR, then you know how important it is to have a key fob that works.
The Chevy HHR Key Fob Program is a simple process that can be done in just a few easy steps.
In this article, we will guide you through the process of programming your key fob.
Whether you are a car enthusiast or just looking to learn more about vehicle technology, this article is for you.
We will provide you with all the information you need to know to program your Chevy HHR key fob.
So, let’s get started!
Also Read: What Are The Chevy Silverado Door Lock Problem? – Guide
Can you program a Chevy key fob yourself?
Programming a Chevy key fob typically involves a specific set of steps that vary depending on the model and year of your Chevy vehicle. While I can provide general guidance, it’s important to consult your vehicle’s owner’s manual for precise instructions. Here’s a general overview of the process:
Method 1: Using Onboard Programming
-
Enter Programming Mode:
Close all vehicle doors.
Insert the key into the ignition and turn it to the “On” position without starting the engine.
Press and hold the “Unlock” button on the driver’s side door panel.
Continue holding the “Unlock” button and insert/remove the key from the ignition two times.
Release the “Unlock” button. The doors should lock and unlock, indicating that the vehicle is in programming mode.
-
Program Key Fob:
Press and hold both the “Lock” and “Unlock” buttons on the key fob simultaneously.
After about 15 seconds, the doors should lock and unlock again, confirming successful programming.
-
Repeat for Additional Key Fobs:
If you have more than one key fob to program, repeat step 2 for each additional fob within 30 seconds.
-
Exit Programming Mode:
Turn the key to the “On” position and back to “Off.”
Remove the key from the ignition.
Test each programmed key fob to ensure it works properly.
Method 2: Professional Programming Tools
If the onboard programming method doesn’t work or is not supported for your specific model, you may need to use professional programming tools. In such cases, it’s recommended to visit a Chevy dealership or a qualified automotive locksmith. They have the necessary equipment and expertise to program key fobs accurately.
How do I find my GM key code?
To find your GM key code, you can access the ACDelco TDS website. This site provides key code information for General Motors vehicles to registered Vehicle Security Professionals 1. The information available on this site may include the ignition key code, radio unlock key code, immobilizer key code, compartment key code, VATS key code, frequency key code, and glove key code.
Alternatively, you can retrieve your GM key code from the GM Key Code Lookup database. However, there are certain requirements to validate vehicle ownership that must be met before GM can provide the current key code.
Also Read: GMC Theft Deterrent System Reset: How To & Tips
How does the GM transponder key work?
A transponder key is a key equipped with an RFID (radio frequency identification) chip inside its plastic head. The chip is programmed with a unique code that is recognized by the vehicle’s immobilizer system.
When the key is inserted into the ignition, the immobilizer system sends a signal to the transponder chip. If the code matches, the immobilizer system allows the engine to start. If the code does not match, the engine will not start.
If you need to program a GM transponder key, you can follow the instructions provided in this video. The video demonstrates how to program a GM transponder key for Chevrolet, Pontiac, Buick, Cadillac, and GMC vehicles. Alternatively, you can refer to the ACDelco TDS website to retrieve key code information for General Motors vehicles.
How do I know if my key fob has a remote start?
Determining whether your key fob has remote start capabilities depends on the specific features installed in your vehicle and the type of key fob you have. Here are a few ways to check if your key fob supports remote start:
1. Review the Vehicle’s Documentation
- Owner’s Manual
Check your vehicle’s owner’s manual. It often provides detailed information about the features and capabilities of your key fob, including whether remote start is supported.
2. Inspect the Key Fob
- Check for Dedicated Buttons
Look for buttons on your key fob that are specifically labeled for remote start. Common labels include “Remote Start,” a circular arrow icon, or a combination of symbols indicating starting functionality.
- Check the Icons
If your key fob has icons or symbols, look for any that represent a car with wavy lines or arrows indicating remote start.
3. Online Resources
- Vehicle Manufacturer’s Website
Visit the official website of the vehicle manufacturer and use the vehicle identification number (VIN) to access detailed information about your specific model and its features.
4. Visual Inspection of the Vehicle
- Check the Dashboard
Start your vehicle and inspect the dashboard for any indicator lights or messages related to remote start. Some vehicles display a remote start icon or message when the engine is started remotely.
- Consult with Dealership or Service Center
Contact your vehicle’s dealership or a service center and provide them with your VIN. They can access your vehicle’s information and confirm whether remote start is included in your key fob’s features.
5. Trial and Error
- Experiment with Key Fob Buttons
If you’re unsure, you can experiment with the buttons on your key fob. Press and hold different buttons to see if the vehicle starts remotely. Be cautious not to accidentally activate other functions.
How long does it take to program a Chevy key fob?
The time it takes to program a Chevy key fob can vary depending on the specific model and year of your vehicle. However, most Chevy key fobs can be programmed in a matter of minutes.
If you’re looking to program a Chevy key fob, you can follow the instructions provided in this video. The video demonstrates how to program a Chevy key fob for Chevrolet, Pontiac, Buick, Cadillac, and GMC vehicles. Alternatively, you can refer to the Tom Gill or Quality Chevrolet websites for step-by-step instructions on how to program a Chevy key fob.
Can you program a new key fob with only one key?
Yes, it is possible to program a new key fob with only one key. However, the process may vary depending on the make and model of your vehicle.
For instance, if you have a Ford vehicle, you can program a spare key with one working key by following the instructions provided in this video. The video demonstrates how to program a Ford transponder chip key with only one key and a remote start system.
If you have a Chevy vehicle, programming a key fob can take a matter of minutes. You can follow the instructions provided in this video to program a Chevy key fob.
FAQs
What is a key fob?
A key fob is a small electronic device that allows you to remotely lock, unlock, and start your car.
How do I program my Chevy HHR key fob?
Here are the steps to program your Chevy HHR key fob:
- Take the driver’s seat, shut all the doors, and unlock them manually.
- Press the key into the ignition port, but let it stay intact. There is no need to start the car.
- You will spot the unlock button on the door next to the driver’s seat. Press and hold the button for a while. At the same time, turn your key in the ignition so that the “On” light flashes. Everything except for the engine will be up and running if executed correctly.
- Turn the key quickly in this order: Off – On – Off – On while still holding the unlock button. Once the sequence is done, release your finger.
- If you are successful, there will be a clicking sound from the door locks. The locks will engage and disengage immediately.
- Use two fingers and long-press the “Lock” and “Unlock” buttons on the key fob. You should keep it that way until the door locks engage and disengage once more time, alerting drivers that the new security engineering method has already been applied.
- Put the newly setup key in the ignition and turn it to “On”. The program is done if you want to add one key fob only. But if several key fobs are included, make sure to set them up altogether.
Why is my Chevy HHR key fob not working?
There are several reasons for a malfunctioning Chevy HHR key fob. Below are some of the most common causes and solutions:
- Low battery: Like most vehicle parts, key fobs draw energy directly from the internal battery, which explains its failure to work when the battery is dead. A quick stop by the store for fresh batteries will suffice.
- Faulty programming: Sometimes, the problem lies in the setup. Get into your car, shut the door, then try to reprogram the key fob. Wait until the door locks engage and disengage twice before turning the key to “On”.
How do I replace my Chevy HHR key fob?
You can replace your Chevy HHR key fob by following these steps:
- Purchase a new key fob from a reputable dealer or online store.
- Take the new key fob to a certified locksmith or dealership to have it programmed.
How much does it cost to replace a Chevy HHR key fob?
The cost of replacing a Chevy HHR key fob varies depending on the dealership or locksmith you choose. On average, it can cost anywhere from $50 to $200.
Can I program my Chevy HHR key fob myself?
Yes, you can program your Chevy HHR key fob yourself by following the steps mentioned above.
How long does it take to program a Chevy HHR key fob?
It takes approximately 10-15 minutes to program a Chevy HHR key fob.
What is the range of a Chevy HHR key fob?
The range of a Chevy HHR key fob varies depending on the model and year of your vehicle. On average, the range is between 50-100 feet.
What is the difference between a key fob and a remote keyless entry system?
A key fob is a small electronic device that allows you to remotely lock, unlock, and start your car. A remote keyless entry system is a feature that allows you to lock and unlock your car without using a key.
What should I do if my Chevy HHR key fob is lost or stolen?
If your Chevy HHR key fob is lost or stolen, you should contact your local dealership or a certified locksmith to have it replaced.
Important: Toyota RAV4 Pre-Collision System Malfunction Reset: A Step-By-Step Guide
Conclusion
Programming your Chevy HHR key fob is a simple process that can be done in just a few easy steps.
With the help of this article, you now have all the information you need to program your key fob.
Whether you are a car enthusiast or just looking to learn more about vehicle technology, this article has provided you with a comprehensive guide to programming your Chevy HHR key fob.
Remember to follow the steps carefully and ensure that you have all the necessary equipment before you begin.
With these easy steps, you can enjoy the convenience of a fully functional key fob for your Chevy HHR.
