2014 VW Jetta Oil Reset: A Step By Step Procedure

Welcome to the world of car maintenance! 

If you own a 2014 VW Jetta, you know that regular oil changes are essential to keep your car running smoothly. 

However, after completing the oil change process, you might be wondering how to reset the oil service light. 

In this article, we will guide you through the step-by-step procedure to reset the oil service light on your 2014 VW Jetta. 

We will also explain why it is important to reset the oil service light and how it can help you maintain your car in top shape. 

So, let’s get started with the 2014 VW Jetta oil reset process!

How do you reset the oil light on a 2014 Volkswagen Jetta?

Resetting the oil light on a 2014 Volkswagen Jetta involves a few straightforward steps. Before you begin, ensure that you have recently changed the oil and the oil filter. Here’s a step-by-step guide:

• Turn on the Ignition

Insert the key into the ignition and turn it to the “ON” position. You don’t need to start the engine; just make sure the electronics are powered.

• Access the MFI Display

Locate the Multi-Function Indicator (MFI) display on your instrument cluster. This display is typically located between the speedometer and the tachometer.

• Navigate to the Settings Menu

Use the controls on the steering wheel to navigate to the “Settings” or “Menu” option on the MFI display. The exact location may vary slightly depending on the specific model and trim of your Jetta.

• Select the Service submenu

Within the Settings or Menu options, look for a submenu related to vehicle service or maintenance. This might be labeled as “Service,” “Maintenance,” or a similar term.

• Access the Oil Change Interval

Once you’re in the service or maintenance submenu, find the option related to the oil change interval or reset.

• Reset the Oil Change Interval

Highlight the option to reset the oil change interval or oil service indicator. Follow the on-screen prompts or use the controls to select the reset option.

• Confirm the Reset

The system will likely ask for confirmation before resetting the oil change interval. Confirm your selection, and the oil light should be reset.

• Turn Off the Ignition

Once the reset is complete, turn off the ignition. You can either remove the key or turn it back to the “OFF” position.

• Start the Engine

Start the engine to ensure that the oil light no longer appears on the dashboard. The light should go out shortly after the engine starts.

What Is 2014 VW Jetta Oil Change Interval?

According to Volkswagen, the oil change frequency for a 2014 VW Jetta can vary based on your driving habits, the type of oil you use, and the specific engine in your Jetta. However, a general rule of thumb is to change your oil every 10,000 miles or at least once a year, whichever comes first.

What Is 2014 VW Jetta Oil Type?

The recommended oil type for a 2014 Volkswagen Jetta can vary depending on the specific engine in your vehicle. Here are the common oil specifications for the available engines:

• 1.8L and 2.0L Gasoline Engines (e.g., SE, SEL models):

Volkswagen generally recommends using synthetic oil with a viscosity of 5W-30 for these gasoline engines.

• 2.0L TDI Diesel Engine:

For the 2.0L TDI (Turbocharged Direct Injection) diesel engine, Volkswagen usually recommends using a synthetic oil with a viscosity of 5W-30 or 5W-40.

2014 VW Jetta Inspection Light Meaning

The inspection light in a 2014 Volkswagen Jetta typically indicates that a scheduled maintenance or inspection is due. This light serves as a reminder to the vehicle owner that specific routine maintenance tasks need to be performed.

How do you reset a VW after an oil change?

To reset the oil change service interval light on a Volkswagen after an oil change, you can follow these steps:

1. Turn on the ignition without starting the engine.
2. Press the accelerator pedal down to the floor and release it three times within five seconds.
3. Turn off the ignition.
4. Start the engine to verify the oil change service interval light has been reset.

What does the oil light mean on a 2015 Volkswagen Jetta?

The yellow oil light on a 2015 Volkswagen Jetta indicates that the oil level is low. If the oil pressure light is red, it indicates that the oil pressure is low, which can cause severe damage to the engine.

How do you reset the radio on a 2014 Volkswagen Jetta?

To reset the radio on a 2014 Volkswagen Jetta, follow these steps:

• Turn on the Ignition

Insert the key into the ignition and turn it to the “ON” position without starting the engine.

• Turn on the Radio

Power on the radio by pressing the “Power” or “On” button.

• Locate the Radio Preset Buttons

Identify the preset buttons on the radio. These are typically labeled with numbers (1 through 6).

• Press and Hold Preset Buttons

Press and hold down the preset buttons “1” and “6” simultaneously.

• Retrieve Radio Serial Number

While holding down the preset buttons, the radio should display the serial number. Note this number as you will need it for the next step.

• Get the Unlock Code

Contact a Volkswagen dealership or refer to your vehicle’s documentation to obtain the radio unlock code. You may need to provide the radio’s serial number.

• Enter the Unlock Code

Once you have the unlock code, use the radio preset buttons to enter the code.

• Complete the Reset

After entering the correct code, the radio should reset, and normal functionality should be restored.

2014 VW Jetta TPMS Reset

To reset the TPMS light on a 2014 VW Jetta, you can follow one of the following procedures:

• Procedure 1: Switch on the ignition without starting the engine. Press the CAR button on the multimedia. Select the vehicle SETTINGS or SETUP menu by tapping the touch screen. Select TIRES. Select SET. When a confirmation message appears, select CONFIRM to execute the TPMS reset 1.
• Procedure 2: Turn the ignition to the ON position with the engine OFF. Press the Menu button located on the instrument cluster. Using the thumb knob, select Tire Pressure. Select Store. Drive the vehicle for at least 20 minutes at a speed of 30 MPH, or more 2.
• Procedure 3: Open the glove compartment. A red-illuminated button should be visible inside. Hold that button for two seconds. The Tire Pressure Monitoring System light should now deactivate.

How do you clear the inspection on a 2014 VW Passat?

Clearing an inspection on a vehicle typically involves addressing and resolving any issues that may be present. 

It’s important to note that attempting to clear an inspection without actually fixing the underlying problems may be illegal and could result in penalties. 

Here are general steps you can take to address common issues and prepare your 2014 VW Passat for inspection:

Check Engine Light (CEL)

• If the Check Engine Light is on, use an OBD-II scanner to retrieve error codes.
• Address the issues indicated by the error codes by fixing or replacing faulty components.
• After repairs, clear the error codes with the OBD-II scanner.

Emissions System

• Ensure that the emission control systems are functioning properly.
• Address any issues related to the catalytic converter, oxygen sensors, or other emission components.
• After repairs, drive the vehicle for some time to allow the system to reset before going for an emissions inspection.

Brakes and Suspension

• Inspect the brake system for wear and tear, and replace brake pads or discs if necessary.
• Check the suspension components for any damage or wear, and replace as needed.

Lights and Signals

• Make sure all exterior lights, including headlights, brake lights, turn signals, and license plate lights, are working properly.
• Replace any burnt-out bulbs.

Tires

• Ensure that the tires have sufficient tread depth and are properly inflated.
• Replace any damaged or excessively worn tires.

Fluids

• Check and top off all essential fluids, including engine oil, transmission fluid, brake fluid, and coolant.

Windshield Wipers

• Replace worn-out wiper blades.

Exhaust System

• Inspect the exhaust system for leaks and damage.
• Repair or replace any damaged components.

Battery

• Ensure that the battery is in good condition and holds a charge.
• General Inspection
• Perform a general visual inspection of the vehicle for any other issues.

FAQs

What does the oil service light mean on a 2014 VW Jetta? 

The oil service light is a notification that an appointment for service is required. It does not indicate that your car has a problem.

Why is it important to reset the oil service light? 

The oil service light is intended to alert you when it’s time to change the engine oil. Even after the old oil has been emptied and replaced with fresh oil, the service message light won’t go away on its own. Thus, you need to reset it so the car can alert you when the subsequent servicing is due. This step is crucial since every VW needs regular maintenance, just like any other vehicle.

How often should I change the oil in my 2014 VW Jetta? 

The oil change frequency for a 2014 VW Jetta can vary based on your driving habits, the type of oil you use, and the specific engine in your Jetta. However, a general rule of thumb is to change your oil every 10,000 miles or at least once a year, whichever comes first.

What are the different ways to reset the oil service light on a 2014 VW Jetta? 

There are different ways to reset the oil service light on a 2014 VW Jetta. You can use the instrument cluster buttons, the Carista app, or the OBDeleven app.

How do I reset the oil service light using the instrument cluster buttons? 

Here are the steps to reset the oil service light using the instrument cluster buttons:

• Switch off your ignition.
• Find the 0.0 option next to the instrument cluster’s right side. Press and hold it.
• Switch on your ignition without starting the engine while releasing the 0.0 option.

How do I reset the oil service light using the Carista app? 

Here are the steps to reset the oil service light using the Carista app:

• Connect the Carista app to your car.
• Go to the “Service” menu.
• Select “Reset oil change service”.

How do I reset the oil service light using the OBDeleven app? 

Here are the steps to reset the oil service light using the OBDeleven app:

• Connect the OBDeleven app to your car.
• Go to the “Apps” menu.
• Select “Oil change” and then “Reset”.

What are the benefits of resetting the oil service light on a 2014 VW Jetta? 

Resetting the oil service light can help you maintain your car in top shape. It ensures that you receive timely reminders for subsequent oil changes and other maintenance tasks. This can help you avoid costly repairs and extend the life of your car.

What should I do if the oil service light does not reset after following the procedure?

If the oil service light does not reset after following the procedure, you may need to repeat the process or seek professional help.

Can I reset the oil service light on my 2014 VW Jetta myself? 

Yes, you can reset the oil service light on your 2014 VW Jetta yourself. However, if you are not comfortable doing it yourself, you can seek professional help.

Conclusion

Performing a 2014 VW Jetta oil reset is a simple process that can help you maintain your car in top shape. 

By resetting the oil service light, you can ensure that you receive timely reminders for subsequent oil changes and other maintenance tasks. 

This can help you avoid costly repairs and extend the life of your car. 

In this article, we have provided you with a step-by-step procedure to reset the oil service light on your 2014 VW Jetta. 

We have also answered some frequently asked questions about the oil reset process. 

We hope that this article has been informative and helpful. 

If you have any more questions, feel free to ask!